Power measurement

KFORCE Plates: To assess your lower limb strength and balance The KFORCE Plates are an innovative product for rehabilitating balance and assessing the symmetry and strength of the lower limb muscles. The KFORCE Plates are easy to install and connect. The KFORCE App protocols evaluate important factors for lower extremity balance and strength: left as well as right lower extremity loading, depth perception balance, centre of pressure, and max strength and symmetry. Each plate has an area of 320 x 160 mm and can support forces up to 300 kg (600 kg for both). Advantages The KFORCE Plates are equipped with an electronic pressure transducer and send real-time audio and visual biofeedback to your smartphone or tablet via the KFORCE App. This product takes advantage of new technologies with the Internet of Things and Rehab Games. This device turns rehabilitation into a game and gives important readings to the therapist or trainer. It also measures progress in lower limb strength and symmetry through its intuitive app. KFORCE Plates are lightweight and can be easily used by ambulatory professionals such as physiotherapists and personal trainers. Product details: Weight: 1.6 kg Dimensions: per plate 30 x 320 x 160 mm Radio range: up to 20 metres Max. Weight: 300 kg per plate, 600 kg for both Battery: 5 hours function with 45 min. charge Power supply: Li-Po battery 600 mAh Radiated power: Max. 5mW Wireless power transmission: 2.4 GHz band (Bluetooth low power) ·         Minimum smartphone and tablet requirements: Android 5.0+ and iOS 10.0+ Bluetooth (low power) 5'' screen The free basic app for this product only includes a limited version for assessment and management with patient profiles, standard assessments, and reports in PDF format. To make the most of the great advantage of the devices, we recommend that you get access to the PRO app or the PRO+ app.

KFORCE Sens Assess joint amplitudes KFORCE Sens is an innovative device for assessing the range of motion and comparing the symmetry between the amplitude of the injured and the healthy limb.KFORCE Sens uses Bluetooth technology with automatic pairing and is very easy to use.Designed for assessment and rehabilitation, the Sens measures the amplitude of the joint. The customisable parameters allow for rehabilitation programmes adapted to the specific needs of the patient. Real-time biofeedback motivates your patient to be more proactive in their rehabilitation. Product details: Weight: 0.04 kg Dimensions: 35 x 25 x 10 mm Sensitivity: 5 ° Accuracy: 3 ° Battery: 60 minutes for 15 minutes charge Wireless power transmission: 2.4 GHz band (Bluetooth low power) Minimum smartphone or tablet requirements: Android 5.0+ and iOS 10.0+ Bluetooth low power 5'' screen The free basic app for this product only includes a limited version for assessment and management with patient profiles, standard assessments, and reports in PDF format. To make the most of the great advantage of the devices, we recommend that you get access to the PRO app or the PRO+ app.

KFORCE Link - Measure Isometric Strength Use the KFORCE LINK to measure isometric strength. Train your patients with real-time biofeedback and take quality measurements. KFORCE Link easily attaches to the therapy table, wall bars or pulley system. For optimal use of the KFORCE Link, the following parts are included: 1 KFORCE Link 2 snap hooks 2 loops to attach to the desired limb, physiotherapy table, wall bars or pulley system. 2 elastic bands of different thicknesses for resistance exercises 1 adjustable fixed strap for measuring maximum isometric strength Minimum smartphone or tablet requirements: Android 5.0+ and iOS 10.0+ Bluetooth low power 5'' screen The free basic app for this product only includes a limited version for assessment and management with patient profiles, standard assessments, and reports in PDF format. To make the most of the great advantage of the devices, we recommend that you get access to the PRO app or the PRO+ app.

KFORCE Bubble Rehabilitation with biofeedback - made easy with inflatable exercise equipment KFORCE Bubble is an innovative and versatile tool that converts pressure changes into a force measurement. It can be combined with, for example, inflatable pillows, balls, or fascia rollers. The KFORCE Bubble is equipped with electronic force transducers and provides real-time biofeedback on your tablet or smartphone via the KFORCE app. You can set strength goals for your patients and motivate them through the rehabilitation process. You can also track your patient's progress with the KFORCE interactive database. The device allows you to work with deformable or inflatable equipment. The KFORCE Bubble is small, lightweight, and mobile. It can therefore be easily used by ambulatory professionals such as physiotherapists and personal trainers. Product details: Weight: 0.1 kg Dimensions: 80 x 55 x 25 mm Radio range: up to 20 m Max. Weight: 90 kg Sensitivity: 0.5 kg Accuracy: 0.5 kg Battery: 90 min. with 15 min. recharge time Wireless power transmission: 2.4 GHz band (Bluetooth low power) Scope of delivery: 1 KFORCE Bubble, 1 TOGU Ball, 1 air-filled roller, 1 needle Minimum smartphone or tablet requirements: Android 5.0+ and iOS 10.0+ Bluetooth low power 5'' screen The free basic app for this product only includes a limited version for assessment and management with patient profiles, standard assessments, and reports in PDF format. To make the most of the great advantage of the devices, we recommend that you get access to the PRO app or the PRO+ app.

The Twin Handle for your KFORCE Muscle Controller The Twin Handle makes measuring muscle strength with the KFORCE Muscle Controller even easier. The strap that is standard on the muscle controller for attaching to the hand is removable and can therefore be replaced with the Twin Handle. It is particularly suitable for measures that require a stable and controlled two-hand grip. The measurement becomes more accurate, and the use is very comfortable.

The Nordic Accessory for your KFORCE Muscle Controller The Nordic Accessory allows you to attach your KFORCE Muscle Controller to a barbell. This is useful for example for the Nordic Hamstring Test or other exercises that require measurement without an operator. The Nordic Accessory is attached to the muscle controller by removing the standard strap and replacing it with the Accessory.

KFORCE Package "Essential With the KFORCE "Essential" package, the name says it all: The package contains the absolute standards from the KFORCE product line. It is particularly suitable for patient assessments. The KFORCE "Essential" package includes 1x KFORCE Plates 1x KFORCE Muscle Controller 1x KFORCE Sens 1x KFORCE Twin Handle 1x KFORCE Bag 1-year "Pro" licence for the KFORCE App Get the most important tools for your patient assessment at an unbeatable package price!

KFORCE Plates: To assess your lower limb strength and balance The KFORCE Plates are an innovative product for rehabilitating balance and assessing the symmetry and strength of the lower limb muscles. The KFORCE Plates are easy to install and connect. The KFORCE App protocols evaluate important factors for lower extremity balance and strength: left as well as right lower extremity loading, depth perception balance, centre of pressure, and max strength and symmetry. Each plate has an area of 320 x 160 mm and can support forces up to 300 kg (600 kg for both). Advantages The KFORCE Plates are equipped with an electronic pressure transducer and send real-time audio and visual biofeedback to your smartphone or tablet via the KFORCE App. This product takes advantage of new technologies with the Internet of Things and Rehab Games. This device turns rehabilitation into a game and gives important readings to the therapist or trainer. It also measures progress in lower limb strength and symmetry through its intuitive app. KFORCE Plates are lightweight and can be easily used by ambulatory professionals such as physiotherapists and personal trainers. Product details: Weight: 1.6 kg Dimensions: per plate 30 x 320 x 160 mm Radio range: up to 20 metres Max. Weight: 300 kg per plate, 600 kg for both Battery: 5 hours function with 45 min. charge Power supply: Li-Po battery 600 mAh Radiated power: Max. 5mW Wireless power transmission: 2.4 GHz band (Bluetooth low power) ·         Minimum smartphone and tablet requirements: Android 5.0+ and iOS 10.0+ Bluetooth (low power) 5'' screen The free basic app for this product only includes a limited version for assessment and management with patient profiles, standard assessments, and reports in PDF format. To make the most of the great advantage of the devices, we recommend that you get access to the PRO app or the PRO+ app.

KFORCE Muscle Controller The KFORCE Muscle Controller is a hand-held dynamometer and ideal for a quick assessment of your patient's or athlete's muscle strength. It is a user-friendly, portable muscle tester.You can use it in your practice as well as in the clinic or club.The device has an ergonomic shape with adjustable straps for better hand fixation and a cushion that can be removed and disinfected. The KFORCE Muscle Controller can also be fixed to hard surfaces, such as a wall, for use as a contact pressure test stand. The unit has a contact area of 10 x 14 cm and can support contact forces of up to 70 kg. Advantages The KFORCE Muscle Controller features an electronic pressure transducer and provides real-time audio and visual feedback to your smartphone or tablet via the KFORCE app. Through targeted exercises, you can set goals for the patient and motivate them to outperform themselves. The app stores the user's results. You can then track their progress in terms of maximum strength, endurance, and muscular symmetry in the app's database. The device is small, light, and mobile. Therefore, it can be wonderfully used by ambulatory professionals such as physiotherapists and personal trainers. Product details: Weight: 0.3 kg Dimensions: 60 x 100 x 140 mm Radio range: up to 20 m Max. Weight: 90 kg Battery: 90 minutes for 15 minutes charge Power supply: Li-Po battery 150 mAh Radiated power: max. 5mW Wireless power transmission: 2.4 GHz band (Bluetooth low power) Minimum requirements for your smartphone or tablet: Android 5.0+ and iOS 10.0+ Bluetooth low power 5'' screen The free basic app for this product only includes a limited version for standard assessment and management of patient profiles and reports in PDF format. To get the most out of all the features of the tool, we recommend that you get access to the PRO app or the PRO+ app.

KFORCE Deltas Improve static and dynamic balance! The KFORCE Deltas are platforms that expand the possibilities of biomechanical analysis of athletic performance. The Deltas connect via Bluetooth® to the KFORCE app on a smartphone or tablet and can help coaches and therapists’ better structure an athlete's return to play. Thanks to their design, load capacity and high frequency, the Deltas measure physical performance in a versatile and fast way, unlike comparable products on the market.   Versatile performance analysis Strength and speed analysis "Jump suite and functional assessments Team statistics Application examples for functional analyses Squats and pushups: power transfer to the floor & execution analysis Repeated jumps: speed, power, and fatigue Alternating jumps: speed, time in the air, reaction time left/right Jump analysis Countermovement Jump and Squat Jump protocols Evaluation of jump height Indicators for thrust, power, RFD (rate of force development) and right/left distribution during the impulse phase Protocols for Drop Jump Jump height after landing Force development during ground contact Reactive Strength Index Completed protocols Strength/Speed Spectrum Profile: Measure the optimal load for maximum strength, an innovative test for biomechanics, strength, and conditioning. Guide your training towards one of these two antagonistic components. Dynamic Strength Index (DSI): Determines the relationship between an athlete's ballistic maximum strength and their isometric maximum strength. This protocol includes the isometric maximum force of the mid-thigh pull (IMTP) and the ballistic maximum force during the Counter Movement Jump (CMJ). Unipodal CMJ / SJ: Highlighting left/right differences in thrust, power, performance, RDF, jump height. Product details Sampling frequency: 500 Hz 4 sensors per platform Comparison precision: 0.3 % Weight: 15 kg per platform Dimensions: 94 cm x 80 cm Scope of delivery: "right" and "left" platform

KFORCE Sens Assess joint amplitudes KFORCE Sens is an innovative device for assessing the range of motion and comparing the symmetry between the amplitude of the injured and the healthy limb.KFORCE Sens uses Bluetooth technology with automatic pairing and is very easy to use.Designed for assessment and rehabilitation, the Sens measures the amplitude of the joint. The customisable parameters allow for rehabilitation programmes adapted to the specific needs of the patient. Real-time biofeedback motivates your patient to be more proactive in their rehabilitation. Product details: Weight: 0.04 kg Dimensions: 35 x 25 x 10 mm Sensitivity: 5 ° Accuracy: 3 ° Battery: 60 minutes for 15 minutes charge Wireless power transmission: 2.4 GHz band (Bluetooth low power) Minimum smartphone or tablet requirements: Android 5.0+ and iOS 10.0+ Bluetooth low power 5'' screen The free basic app for this product only includes a limited version for assessment and management with patient profiles, standard assessments, and reports in PDF format. To make the most of the great advantage of the devices, we recommend that you get access to the PRO app or the PRO+ app.

KForce App You want to use all the possibilities of your KForce tools without restrictions? Then the KForce App is exactly the app you need. - Note: The standard app, which is available free of charge, only has limited functions (patient profile & standard assessment). If you want to support your patients in the best possible way, the KForce App Pro or KForce App Pro+ is the app for you. Depending on how many tools you want to use your app with you can choose from the following versions: KForce App Pro Cloud for pairing with up to 3 devices Management and standard assessments of patient profiles including PDF reports. Account customisations: User profile, hospital information, personalised reports (with logo, address, comments, signature, etc.) Advanced options: Access to exercises, rehab games and client ratings Creation of detailed protocols KForce App Pro+ Cloud for pairing with up to 20 devices Management and standard assessments of patient profiles including PDF reports Account customisations: User profile, hospital information, personalised reports (with logo, address, comments, signature, etc.) Advanced options: Access to exercises, rehab games and client ratings Creation of detailed protocols Biolab: use of combinable analyses from two KForce devices, jump analyses, research mode (raw data), Nordic Hamstring Tes The KForce apps are available for both Android and iOS. Billing is annual. If you only want to book the apps on a monthly basis, please contact us by phone (+49 (0) 6021 62998-100) or by mail ([email protected]).

KFORCE Link - Measure Isometric Strength Use the KFORCE LINK to measure isometric strength. Train your patients with real-time biofeedback and take quality measurements. KFORCE Link easily attaches to the therapy table, wall bars or pulley system. For optimal use of the KFORCE Link, the following parts are included: 1 KFORCE Link 2 snap hooks 2 loops to attach to the desired limb, physiotherapy table, wall bars or pulley system. 2 elastic bands of different thicknesses for resistance exercises 1 adjustable fixed strap for measuring maximum isometric strength Minimum smartphone or tablet requirements: Android 5.0+ and iOS 10.0+ Bluetooth low power 5'' screen The free basic app for this product only includes a limited version for assessment and management with patient profiles, standard assessments, and reports in PDF format. To make the most of the great advantage of the devices, we recommend that you get access to the PRO app or the PRO+ app.

KFORCE Grip - Evaluate your grip strength The KFORCE Grip is a dynamometer to measure your grip strength in different situations. You can assess maximum isometric strength as well as fatigue.Grip strength is very important in sports and rehabilitation for gripping, lifting, and throwing and should be assessed especially after hand trauma or surgery.The device has an ergonomic elliptical shape for easy gripping with an outer diameter of 40 to 45 mm and can record grip strength of up to 70 kg. Advantages KFORCE Grip features an electronic pressure transducer and provides you with real-time biofeedback on your tablet or smartphone via the KFORCE App. This allows you to set strength goals for your patients and motivate them through the rehabilitation process. You can then track the patient's progress through KFORCE's interactive database. The device is small, lightweight, and mobile. Therefore, it can also be used by outpatient professionals such as physiotherapists and personal trainers. Product details: Weight: 0.2 kg Dimensions: 45 x 55 x 160 mm Radio range: up to 20 m Max. Weight: 90 kg Battery: 1h30h function for 15 min. charge Power supply: Li-Po battery 150 mAh Radiated power: max. 5 mW Wireless power transmission: 2.4 GHz band (Bluetooth low power) Minimum smartphone or tablet requirements Android 5.0+ and iOS 10.0+ Bluetooth low power 5'' screen The free basic app for this product only includes a limited version for assessment and management with patient profiles, standard assessments, and reports in PDF format. To make the most of the great advantage of the devices, we recommend that you get access to the PRO app or the PRO+ app.

KFORCE Bubble Rehabilitation with biofeedback - made easy with inflatable exercise equipment KFORCE Bubble is an innovative and versatile tool that converts pressure changes into a force measurement. It can be combined with, for example, inflatable pillows, balls, or fascia rollers. The KFORCE Bubble is equipped with electronic force transducers and provides real-time biofeedback on your tablet or smartphone via the KFORCE app. You can set strength goals for your patients and motivate them through the rehabilitation process. You can also track your patient's progress with the KFORCE interactive database. The device allows you to work with deformable or inflatable equipment. The KFORCE Bubble is small, lightweight, and mobile. It can therefore be easily used by ambulatory professionals such as physiotherapists and personal trainers. Product details: Weight: 0.1 kg Dimensions: 80 x 55 x 25 mm Radio range: up to 20 m Max. Weight: 90 kg Sensitivity: 0.5 kg Accuracy: 0.5 kg Battery: 90 min. with 15 min. recharge time Wireless power transmission: 2.4 GHz band (Bluetooth low power) Scope of delivery: 1 KFORCE Bubble, 1 TOGU Ball, 1 air-filled roller, 1 needle Minimum smartphone or tablet requirements: Android 5.0+ and iOS 10.0+ Bluetooth low power 5'' screen The free basic app for this product only includes a limited version for assessment and management with patient profiles, standard assessments, and reports in PDF format. To make the most of the great advantage of the devices, we recommend that you get access to the PRO app or the PRO+ app.

KForce App You want to use all the possibilities of your KForce tools without restrictions? Then the KForce App is exactly the app you need. - Note: The standard app, which is available free of charge, only has limited functions (patient profile & standard assessment). If you want to support your patients in the best possible way, the KForce App Pro or KForce App Pro+ is the app for you. Depending on how many tools you want to use your app with you can choose from the following versions: KForce App Pro Cloud for pairing with up to 3 devices Management and standard assessments of patient profiles including PDF reports. Account customisations: User profile, hospital information, personalised reports (with logo, address, comments, signature, etc.) Advanced options: Access to exercises, rehab games and client ratings Creation of detailed protocols KForce App Pro+ Cloud for pairing with up to 20 devices Management and standard assessments of patient profiles including PDF reports Account customisations: User profile, hospital information, personalised reports (with logo, address, comments, signature, etc.) Advanced options: Access to exercises, rehab games and client ratings Creation of detailed protocols Biolab: use of combinable analyses from two KForce devices, jump analyses, research mode (raw data), Nordic Hamstring Tes The KForce apps are available for both Android and iOS. Billing is annual. If you only want to book the apps on a monthly basis, please contact us by phone (+49 (0) 6021 62998-100) or by mail ([email protected]).

KFORCE Package "Essential With the KFORCE "Essential" package, the name says it all: The package contains the absolute standards from the KFORCE product line. It is particularly suitable for patient assessments. The KFORCE "Essential" package includes 1x KFORCE Plates 1x KFORCE Muscle Controller 1x KFORCE Sens 1x KFORCE Twin Handle 1x KFORCE Bag 1-year "Pro" licence for the KFORCE App Get the most important tools for your patient assessment at an unbeatable package price!

KFORCE Package "Essential With the KFORCE "Essential" package, the name says it all: The package contains the absolute standards from the KFORCE product line. It is particularly suitable for patient assessments. The KFORCE "Essential" package includes 1x KFORCE Plates 1x KFORCE Muscle Controller 1x KFORCE Sens 1x KFORCE Twin Handle 1x KFORCE Bag 1-year "Pro" licence for the KFORCE App Get the most important tools for your patient assessment at an unbeatable package price!

KFORCE Package "Essential With the KFORCE "Essential" package, the name says it all: The package contains the absolute standards from the KFORCE product line. It is particularly suitable for patient assessments. The KFORCE "Essential" package includes 1x KFORCE Plates 1x KFORCE Muscle Controller 1x KFORCE Sens 1x KFORCE Twin Handle 1x KFORCE Bag 1-year "Pro" licence for the KFORCE App Get the most important tools for your patient assessment at an unbeatable package price!